目次

1.要旨
2.調査方法
2.1.二次調査
2.2.一次データ収集
2.3.市場形成と検証
2.4.報告書作成、品質チェック、納品
3.市場構造
3.1.市場への配慮
3.2.前提条件
3.3.限界
3.4.略語
3.5.情報源
3.6.定義
4.経済・人口統計
5.ヒートポンプの世界市場展望
5.1.市場規模（金額ベース
5.2.地域別市場シェア
5.3.市場規模および予測、タイプ別
5.4.市場規模・予測：容量別
5.5.市場規模・予測：エンドユーザー別
6.アジア太平洋地域のヒートポンプ市場展望
6.1.市場規模（金額別
6.2.国別市場シェア
6.3.市場規模および予測、タイプ別
6.4.市場規模・予測：容量別
6.5.市場規模・予測：エンドユーザー別
7.市場ダイナミクス
7.1.市場促進要因と機会
7.2.市場の阻害要因と課題
7.3.市場動向
7.3.1.XXXX
7.3.2.XXXX
7.3.3.XXXX
7.3.4.XXXX
7.3.5.XXXX
7.4.コビッド19効果
7.5.サプライチェーン分析
7.6.政策と規制の枠組み
7.7.業界専門家の見解
7.8.中国ヒートポンプ市場の展望
7.8.1.市場規模（金額ベース
7.8.2.タイプ別市場規模・予測
7.8.3.容量別市場規模・予測
7.8.4.エンドユーザー別市場規模・予測
7.9.日本のヒートポンプ市場展望
7.9.1.金額別市場規模
7.9.2.タイプ別市場規模・予測
7.9.3.容量別市場規模・予測
7.9.4.エンドユーザー別市場規模・予測
7.10.インドのヒートポンプ市場展望
7.10.1.金額別市場規模
7.10.2.タイプ別市場規模・予測
7.10.3.容量別市場規模・予測
7.10.4.エンドユーザー別市場規模・予測
7.11.オーストラリアのヒートポンプ市場展望
7.11.1.金額別市場規模
7.11.2.タイプ別市場規模・予測
7.11.3.容量別市場規模・予測
7.11.4.エンドユーザー別市場規模・予測
7.12.韓国のヒートポンプ市場展望
7.12.1.金額別市場規模
7.12.2.タイプ別市場規模および予測
7.12.3.容量別市場規模・予測
7.12.4.エンドユーザー別市場規模・予測
8.競争環境
8.1.競合ダッシュボード
8.2.主要企業の事業戦略
8.3.主要企業の市場ポジショニングマトリックス
8.4.ポーターの5つの力
8.5.会社概要
8.5.1.株式会社デンソー
8.5.1.1.会社概要
8.5.1.2.会社概要
8.5.1.3.財務ハイライト
8.5.1.4.地理的洞察
8.5.1.5.事業セグメントと業績
8.5.1.6.製品ポートフォリオ
8.5.1.7.主要役員
8.5.1.8.戦略的な動きと展開
8.5.2.トラン・テクノロジーズ plc
8.5.3.三菱電機株式会社
8.5.4.ミデアグループ
8.5.5.パナソニックホールディングス
8.5.6.ダイキン工業
8.5.7.富士通株式会社
8.5.8.ジョンソンコントロールズ・インターナショナル plc
8.5.9.リームマニュファクチャリングカンパニー
8.5.10.ロバート・ボッシュ GmbH
8.5.11.グレンディンプレックス
8.5.12.レノックス・インターナショナル
9.戦略的提言
10.付録
10.1.よくある質問
10.2.注意事項
10.3.関連レポート
11.免責事項

図表一覧

図1：ヒートポンプの世界市場規模（億ドル）、地域別、2023年・2029年
図2：市場魅力度指数（2029年地域別
図3：市場魅力度指数（2029年セグメント別
図4：ヒートポンプの世界市場規模（金額ベース）（2018年、2023年、2029年）（単位：億米ドル
図5：ヒートポンプの世界市場地域別シェア（2023年）
図6：アジア太平洋地域のヒートポンプ市場規模：金額（2018年、2023年、2029年）（単位：億米ドル）
図7：アジア太平洋地域のヒートポンプの国別市場シェア（2023年）
図8：中国のヒートポンプ市場規模：金額（2018年、2023年、2029年）（単位：億米ドル）
図9：日本のヒートポンプ市場規模：金額(2018年、2023年、2029F)（単位：億米ドル）
図10：インドのヒートポンプ市場規模：金額(2018年、2023年&2029F)（単位：億米ドル）
図11：オーストラリアのヒートポンプ市場規模：金額(2018年、2023年&2029F)（単位：億米ドル）
図12：韓国のヒートポンプ市場規模：金額(2018年、2023年&2029F)（単位：億米ドル）
図13：上位5社の競争ダッシュボード（2023年
図14：ヒートポンプ世界市場のポーターの5つの力

表一覧

表1：ヒートポンプの世界市場スナップショット（セグメント別）（2023年・2029年）（単位：億米ドル
表2：上位10カ国の経済スナップショット（2022年
表3：その他の主要国の経済スナップショット（2022年
表4：外国通貨から米ドルへの平均為替レート
表5：ヒートポンプの世界市場規模・タイプ別予測（2018～2029F）（単位：億米ドル）
表6：ヒートポンプの世界市場規模・予測：容量別（2018～2029F）（単位：億米ドル）
表7：ヒートポンプの世界市場規模・予測：エンドユーザー別（2018～2029F）（単位：億米ドル）
表8：アジア太平洋地域のヒートポンプ市場規模・予測：タイプ別（2018～2029F）（単位：億米ドル）
表9：アジア太平洋地域のヒートポンプ市場規模・予測：容量別（2018～2029F）（単位：億米ドル）
表10：アジア太平洋地域のヒートポンプ市場規模・予測：エンドユーザー別（2018年～2029F）（単位：億米ドル）
表11：ヒートポンプ市場の影響要因（2023年
表12：中国のヒートポンプ市場規模・予測：タイプ別（2018～2029F）（単位：億米ドル）
表13：中国のヒートポンプ市場規模・予測：容量別（2018年～2029年） （単位：億米ドル）
表14：中国ヒートポンプ市場規模・予測：エンドユーザー別（2018年～2029F）（単位：億米ドル）
表15：日本のヒートポンプ市場規模・予測：タイプ別（2018年～2029F）（単位：億米ドル）
表16：日本のヒートポンプ市場規模・予測：容量別（2018年～2029F）（単位：億米ドル）
表17：日本のヒートポンプ市場規模・予測：エンドユーザー別（2018年～2029F）（単位：億米ドル）
表18：インドのヒートポンプ市場規模・予測：タイプ別（2018年～2029F）（単位：億米ドル）
表19：インドのヒートポンプ市場規模・予測：容量別（2018年～2029F）（単位：億米ドル）
表20：インドのヒートポンプ市場規模・予測：エンドユーザー別（2018年～2029F）（単位：億米ドル）
表21：オーストラリアのヒートポンプ市場規模・予測：タイプ別（2018年～2029F）（単位：億米ドル）
表22：オーストラリアのヒートポンプ市場規模・予測：容量別 (2018〜2029F) (単位：億米ドル)
表23：オーストラリアのヒートポンプ市場規模・予測：エンドユーザー別（2018年～2029F）（単位：億米ドル）
表24：韓国のヒートポンプ市場規模・予測：タイプ別（2018年～2029F）（単位：億米ドル）
表25：韓国のヒートポンプ市場規模・予測：容量別（2018～2029F）（単位：億米ドル）
表26：韓国のヒートポンプ市場規模・予測：エンドユーザー別(2018～2029F) (単位：億米ドル)

Growing urbanization, rising energy costs, and increasing environmental concerns are fueling demand for energy-efficient and sustainable heating and cooling solutions. Heat pumps, with their ability to both heat and cool spaces efficiently, are emerging as a compelling alternative to traditional HVAC systems. This market encompasses a diverse range of stakeholders, including residential and commercial consumers, government agencies, and a growing pool of heat pump manufacturers and distributors. As the APAC region grapples with the challenges of climate change and energy security, the heat pump market presents a promising opportunity to promote energy efficiency and create a more sustainable future. Beyond the well-established adoption of heat pumps in developed economies like Japan, the APAC landscape presents some unique considerations that are shaping the market's growth trajectory. Firstly, the vast geographic expanse of the APAC region encompasses a wide range of climates, from the frigid winters of northern China to the tropical heat of Southeast Asia. This diversity necessitates a focus on developing heat pump models with a wider operational range and the ability to perform efficiently in extreme weather conditions. Manufacturers are increasingly tailoring their offerings to cater to the specific climatic needs of different APAC sub-regions. For instance, research and development efforts are underway to create heat pumps that can effectively extract heat from the cold ambient air prevalent in northern regions during winter months. Secondly, the APAC heat pump market is witnessing a growing emphasis on government intervention and policy support. Recognizing the potential of heat pumps to contribute to energy security and environmental sustainability goals, governments in several APAC countries are implementing policies that incentivize heat pump adoption. These include tax breaks for energy-efficient appliances, subsidies for heat pump installations, and stricter building codes mandating the use of energy-efficient HVAC systems. China, for example, has established ambitious targets for heat pump deployment within its national energy plans, demonstrating a strong commitment to promoting this technology.

According to the research report, “Asia Pacific Heat Pump Market Outlook, 2029,” published by Bonafide Research, the Asia Pacific Heat Pump market is expected to reach a market size of more than USD 68 Billion by 2029. Beyond the well-established presence of major heat pump manufacturers in the region, the APAC landscape presents unique opportunities and considerations that are shaping the market's growth trajectory. One noteworthy trend is the rise of "district heating and cooling" (DHC) systems powered by heat pumps. DHC systems centralize heat generation and distribution, typically using a network of underground pipes to deliver hot or cold water to multiple buildings. This approach offers significant efficiency gains, particularly in densely populated urban areas. Several APAC countries, such as China and South Korea, are actively investing in DHC infrastructure, creating a fertile ground for large-scale heat pump implementation. The integration of heat pumps with renewable energy sources like solar or geothermal further enhances the environmental benefits of DHC systems, positioning them as a sustainable solution for urban heat and cooling demands. Another unique aspect of the APAC heat pump market is the growing focus on "cold chain logistics." Maintaining a consistent cold temperature is crucial for transporting and storing perishable goods, particularly food and pharmaceuticals. Traditional refrigeration systems can be energy-intensive, and heat pumps offer a more sustainable alternative. Several APAC countries are experiencing significant growth in their cold chain logistics sectors due to expanding e-commerce markets and growing populations. This presents a tremendous opportunity for heat pump manufacturers to develop innovative solutions specifically designed for cold chain applications. Additionally, government initiatives promoting food security and reducing food spoilage can further propel the adoption of heat pumps within the cold chain logistics sector.


Market Drivers

• Rising Disposable Incomes and Increasing Urbanization: The APAC region is witnessing a burgeoning middle class with rising disposable incomes. This translates into a growing demand for improved living standards and increased investment in homeownership. As a result, there's a surge in residential construction across the region. Heat pumps cater to this growing demand for comfortable living environments by offering efficient and versatile climate control solutions. Furthermore, rapid urbanization within APAC is leading to a rise in high-rise buildings and multi-unit dwellings. Heat pump technology is well-suited for these applications due to its ability to provide efficient space conditioning for multiple units within a single building. The confluence of rising disposable incomes, increasing urbanization, and the growing need for comfortable living spaces are significant drivers for the APAC heat pump market.
• Growing Focus on Energy Efficiency and Sustainability: The APAC region faces a growing demand for energy, particularly in rapidly developing economies like China and India. This has resulted in concerns about rising energy costs and the environmental impact of traditional fossil fuel-based energy sources. As a result, governments across APAC are implementing stricter energy efficiency regulations and promoting the adoption of clean energy technologies. Heat pumps offer a compelling solution in this context. Their ability to efficiently generate both heating and cooling translates to significant energy savings compared to conventional HVAC systems. Additionally, heat pumps leverage renewable energy sources like solar power, minimizing their environmental footprint and aligning with the region's growing focus on sustainability. This emphasis on energy efficiency and environmental responsibility is a significant driver for the APAC heat pump market.

Market Challenges

• Upfront Installation Costs: Compared to traditional air conditioning units, heat pumps require a higher initial investment. This can be a significant barrier for budget-conscious consumers, particularly in developing economies within the APAC region. Government incentives, such as tax breaks or subsidies for heat pump installations, can help bridge this cost gap and encourage wider adoption. Additionally, promoting innovative financing options like leasing programs or pay-as-you-save schemes can make heat pumps more accessible to a broader range of consumers within the APAC market.
• Shortage of skilled technicians: A shortage of skilled technicians trained in heat pump installation and maintenance can pose a challenge in some parts of the APAC region. The complex nature of heat pump technology necessitates proper installation and maintenance for optimal performance. A lack of qualified technicians can lead to improper installations, reduced efficiency, and potential customer dissatisfaction. Investing in training programs and skill development initiatives for technicians can address this gap and ensure the proper installation and maintenance of heat pumps across the APAC region.


Air-to-air heat pumps dominate the Asia-Pacific heat pump market due to rapid urbanization, increasing demand for residential HVAC solutions, and government initiatives promoting energy-efficient technologies.

Air-to-Air Heat Pumps dominates the APAC heat pump market, particularly in residential applications across Southeast Asia and South Asia. Their ability to provide both heating and cooling functions makes them a versatile solution for regions with hot and humid climates. Additionally, air-to-air heat pumps offer a relatively lower upfront cost compared to other heat pump types, making them an attractive option for budget-conscious consumers. However, their efficiency can be impacted by extreme outdoor temperatures, limiting their suitability for colder regions within the APAC market. Air-to-Water Heat Pumps are gaining traction in the APAC market, particularly in developed economies like Japan, South Korea, and Australia. Air-to-water heat pumps offer a more versatile heating solution compared to air-to-air models, as they can be integrated with hydronic underfloor heating systems or domestic hot water storage tanks. This makes them suitable for both space heating and hot water needs, particularly in regions with cooler climates. However, the installation cost of air-to-water heat pumps can be higher compared to air-to-air models, potentially limiting their penetration in budget-constrained markets. Water Source Heat Pumps cater to a niche market within APAC, with applications concentrated in regions with access to geothermal resources or reliable water sources like rivers or lakes. Water source heat pumps offer exceptional efficiency by leveraging the constant temperature of the ground or water body as a heat source or heat sink. However, their adoption is limited by the availability of suitable water sources and the upfront cost associated with drilling geothermal wells. This segment holds promise in specific regions with geothermal potential, like parts of China, Japan, and New Zealand. Similar to water source heat pumps, geothermal heat pumps utilize the constant temperature of the earth as a heat source or heat sink. However, they rely on dedicated geothermal wells drilled deep underground to access this geothermal energy. While offering the highest efficiency among all heat pump types, geothermal heat pumps come with a significantly higher upfront cost due to the well drilling requirements. This limits their adoption to high-end residential or commercial projects in developed economies within APAC. Hybrid heat pumps combine electric heat pump technology with a secondary heating source, such as a gas furnace or boiler. This configuration allows the heat pump to operate efficiently in moderate temperatures, while the secondary heating source takes over during extreme cold conditions. Hybrid heat pumps cater to regions with wider temperature variations, offering a balance between efficiency and performance throughout the year. However, the added complexity of the system can contribute to a higher upfront cost compared to traditional air-to-air heat pumps. According to the report, the Heat Pump market is segmented into Up to 10 kW capacity, 10–20 kW, 20–30 kW capacity and Above 30 kW capacity.


The APAC heat pump market exhibits a distinct segmentation by capacity, reflecting the diverse needs of residential and commercial applications across the region. Up to 10 kW capacity heat pumps cater primarily to residential applications in single-family homes and apartments. These compact and cost-effective systems are ideal for smaller living spaces, typically ranging from 50 to 100 square meters, and are particularly popular in densely populated urban areas with limited space for bulky HVAC systems. Government initiatives promoting energy efficiency in residential buildings often target this segment, offering subsidies or tax breaks for heat pump installations in new or existing homes, further driving adoption in this capacity range. Moving up the capacity ladder, 10 kW – 20 kW heat pumps cater to a wider variety of residential applications, encompassing larger single-family homes, townhouses, and small commercial buildings like offices or retail stores. Heat pumps within this range offer increased heating and cooling capacity compared to the lower capacity segment, making them suitable for spaces between 100 and 200 square meters. This segment is witnessing significant growth in developing economies within APAC, where rising disposable incomes and increasing urbanization drive the demand for more spacious and comfortable living environments. Additionally, growing environmental awareness is leading some consumers in this segment to opt for energy-efficient heat pumps over traditional HVAC systems. 20 kW – 30 kW heat pumps cater to larger residential buildings like multi-unit apartments or small hotels, along with commercial applications like restaurants or educational institutions. These systems offer even more powerful heating and cooling capabilities, suitable for spaces exceeding 200 square meters, and are particularly relevant in mature economies within APAC where larger commercial buildings are more prevalent. Growing investments in the hospitality sector across the region are driving demand for heat pumps in hotels and resorts, as these systems can efficiently manage climate control in multiple guest rooms and common areas. Above 30 kW high-capacity heat pumps cater to large-scale commercial and industrial applications, including factories, warehouses, and data centers. These systems offer the most powerful heating and cooling capabilities, often requiring a cascade configuration to achieve the desired output. Due to the significant upfront investment associated with these high-capacity systems, careful feasibility studies and cost-benefit analyses are crucial before deployment. Government regulations promoting energy efficiency in large commercial buildings, along with growing concerns about industrial energy consumption, are potential growth drivers for this segment. However, the initial cost remains a significant barrier, and the market is heavily influenced by the economic climate and investment decisions within the industrial sector of various APAC countries.

According to the report, the Heat Pump market is segmented into Residential, Commercial and Industrial sectors.
The residential sector currently represents the dominant segment within the APAC heat pump market, particularly in developed economies like Japan, South Korea, and Australia. Rising energy costs, growing concerns about environmental sustainability, and increasing disposable incomes in these countries are fueling demand for energy-efficient heating and cooling solutions. Government incentives promoting energy-efficient appliances and tax breaks for heat pump installations further accelerate adoption within the residential segment. Within this segment, a growing preference for multi-function heat pumps that provide both heating and cooling capabilities is evident, particularly in regions with distinct seasonal variations. However, affordability remains a key concern in some developing economies within APAC. Budget-conscious consumers might opt for traditional air conditioners or heating systems due to the lower upfront cost, even though heat pumps offer significant energy savings in the long run. Targeted government initiatives and financing options can address this affordability gap and encourage wider adoption of heat pumps within the residential segment across the APAC region. The commercial segment of the APAC heat pump market is witnessing significant growth potential, driven by factors like increasing government regulations promoting green building practices and a focus on operational cost reduction within the commercial sector. Hotels, offices, educational institutions, and retail spaces are prime candidates for heat pump adoption due to their high energy consumption for space heating and cooling. The ability of heat pumps to deliver efficient and environmentally friendly climate control aligns perfectly with the growing demand for sustainable solutions within the commercial real estate sector. Furthermore, advancements in heat pump technology, such as high-capacity units and cascade systems, are expanding their applicability to larger commercial buildings. However, initial investment costs and potential space constraints for installing heat pumps within existing commercial buildings can be deterrents. Building owners might require strong justifications regarding long-term return on investment and energy savings to adopt heat pump technology. Educational initiatives highlighting the life-cycle cost benefits and environmental advantages of heat pumps can be instrumental in overcoming these challenges and driving wider adoption within the commercial segment. The industrial segment represents the nascent stage of the APAC heat pump market, but it holds immense potential for future growth. Certain industries, such as food processing, manufacturing, and chemicals, require precise temperature control for various processes. Heat pumps offer a sustainable and energy-efficient alternative to traditional industrial heating and cooling systems, particularly for low-to-medium temperature applications. The ability of heat pumps to recover waste heat and utilize it for other processes further enhances their appeal within the industrial sector. However, technical considerations regarding the specific temperature requirements of industrial processes and the availability of high-capacity heat pump solutions tailored for industrial applications remain crucial factors. Furthermore, the initial investment costs for industrial heat pumps can be significant.


Based on the report, the major countries covered include China, Japan, India, Australia, South Korea, and the rest of Asia Pacific.

China's dominance in the APAC heat pump market stems from a confluence of factors, encompassing robust government support, rapid urbanization, growing environmental concerns, and a well-established domestic manufacturing base. Firstly, the Chinese government has actively promoted heat pump adoption through various policy initiatives. Financial subsidies for heat pump purchases, tax breaks for manufacturers, and stricter energy efficiency regulations for buildings have all significantly incentivized the transition from traditional coal-fired heating systems to cleaner and more efficient heat pump technology. This policy push aligns with China's broader environmental goals of reducing air pollution and carbon emissions, making heat pumps a strategic solution for achieving these objectives. Secondly, China's rapid urbanization has fueled demand for efficient heating and cooling solutions in newly constructed residential and commercial buildings. Heat pumps offer a cost-effective and versatile solution for these spaces, providing both heating and cooling capabilities in a single system. Additionally, rising disposable incomes within China's growing middle class allow for increased investment in energy-efficient appliances like heat pumps, further propelling market growth. Thirdly, China boasts a well-established domestic manufacturing base for heat pumps, offering a significant competitive advantage. This translates into a wider variety of heat pump models at different price points, catering to the diverse needs of consumers. Furthermore, domestic production allows for shorter lead times and potentially lower costs compared to imported heat pumps. The presence of a skilled workforce and continuous advancements in heat pump technology further solidify China's position as a leading manufacturer and exporter of heat pumps within the APAC region. However, it's crucial to acknowledge certain challenges within the Chinese heat pump market. One concern is the inconsistency in quality standards among different manufacturers. Implementing stricter quality control measures will be essential for ensuring consumer confidence and promoting the long-term viability of the market. Additionally, raising public awareness about the benefits of heat pump technology, particularly in regions with traditionally colder climates accustomed to coal-fired heating systems, will be crucial for continued market expansion.







Considered in this report
• Historic year: 2018
• Base year: 2023
• Estimated year: 2024
• Forecast year: 2029

Aspects covered in this report
• Heat Pump market Outlook with its value and forecast along with its segments
• Various drivers and challenges
• On-going trends and developments
• Top profiled companies
• Strategic recommendation

By Type
• Air-to-Air Heat Pump
• Air-to-Water Heat Pump
• Water Source Heat Pump
• Ground Source Heat Pump
• Hybrid Heat Pump

By Capacity
• Up to 10 kW
• 10–20 kW
• 20–30 kW
• Above 30 kW

By End User
• Residential
• Commercial
• Industrial

The approach of the report:
This report consists of a combined approach of primary and secondary research. Initially, secondary research was used to get an understanding of the market and list the companies that are present in it. The secondary research consists of third-party sources such as press releases, annual reports of companies, and government-generated reports and databases. After gathering the data from secondary sources, primary research was conducted by conducting telephone interviews with the leading players about how the market is functioning and then conducting trade calls with dealers and distributors of the market. Post this; we have started making primary calls to consumers by equally segmenting them in regional aspects, tier aspects, age group, and gender. Once we have primary data with us, we can start verifying the details obtained from secondary sources.

Intended audience
This report can be useful to industry consultants, manufacturers, suppliers, associations, and organizations related to the Heat Pump industry, government bodies, and other stakeholders to align their market-centric strategies. In addition to marketing and presentations, it will also increase competitive knowledge about the industry.
***Please Note: It will take 48 hours (2 Business days) for delivery of the report upon order confirmation.